Home & Lifestyle

Bathtub Installation – A Quick Guide to New Bathtubs and Showers

Bathtub installation is not a common undertaking. Bathtubs are typically installed by plumbers and not by do-it-yourselfers. That is because it is usually too complicated an undertaking for the average homeowner to attempt. Even if you hire a plumber for the job, you will likely be charged an arm and a leg for installing a bathtub, especially if you try to install it yourself.

A less expensive way to install a bathtub is with a do-it-yourself kit. Many kits will come with everything that you need in order to complete the job including the pipes, jets, and all of the parts necessary for the installation. However, you may need to buy some extra plumbing supplies or specialty tools in order to have a well-finished project. If you decide to go this route, make sure that you read and follow the instructions carefully in order to avoid making mistakes that could be costly.

A less expensive option for your new bathtub installation is with an acrylic tub. These bathtubs are generally much cheaper than their acrylic counterparts but they still give you the same style of the tub and they can still be a beautiful addition to any bathroom. While these acrylic tubs can still be very expensive to purchase, you may want to check out the “fake” acrylic versions that are available. The look is virtually the same as the real thing and they are usually sold at reasonable prices.

Another way to install a bathtub is to use a special concrete slab and install the jets. Using a concrete slab is not recommended for many reasons. First of all, it is very difficult to install the vents, jets, and other fixtures using just concrete. The concrete slab will often crack under the pressure from the bathtub and it also provides little in the way of support for the new bathtub. You are far better off using a pre-made concrete slab instead and then installing the jets, vents, and any other plumbing equipment yourself.

Finally, you have the option of using traditional joists. Traditional joists were very heavy and required large braces to keep them in place and were susceptible to the stress of being used with jets and other heavy objects. With a new concrete slab, you can use smaller bracing and you get all the benefits of the spa without the weight and limitations of using traditional joists. The small savings in cost and increased durability of these bracing systems make them a very viable option for your bathroom remodel.

No matter which option you choose for your new bathtub or shower, installation should be fairly easy to do. It really just requires marking the location of your new fixtures and then securing them with screws and bolts. Make sure that you use the right type of fasteners and that the drain is attached correctly to the tub or shower floor. By following this basic guide, you will save time and money when it comes to your bathroom redesign. For more details on bathroom remodeling visit www.lasvegasbathroomremodeling.net.